Upcoming training & events

Fri 2 May 2025

9:00 AM - 4:30 PM (7 hours 30 minutes)

This one-day course will help you meet your regulatory requirements if your risk assessment indicates that first aid training covering emergency protocols only is sufficient for your workplace.

3 - 6 May 2025

4 days, 9:15 AM - 6:00 PM

The RYA Day Skipper Motor (Power) Course includes boat handling safety and navigation skills and is aimed at new motor cruiser skippers. It enables new motorboats to skipper a motor cruiser in familiar waters by day. Any UK citizen or bona fide resident who achieves the Day Skipper Power is automatically eligible for the ICC (International Licence) for powered craft (unrestricted by length).

5 - 8 May 2025

4 days, 9:00 AM - 5:00 PM

This course is for Experienced Software Developers who are completely new to C++ programming or those with elementary skills in C++, who need to gain hands-on experience of developing commercial applications.

6 - 9 May 2025

4 days, 9:00 AM - 5:00 PM

The City & Guilds accredited Authorised Person Electrical Low Voltage course will enable you to gain the knowledge required to carry out Authorised Person duties and responsibilities in order to achieve compliance with the requirements of the Electricity at Work Regulations 1989, using JSP375 as the reference for safe procedures.

6 - 7 May 2025

2 days, 9:00 AM - 5:00 PM

This City & Guilds accredited course will enable you to gain the knowledge required to carry out the role of Skilled/Competent Person (Electrical). It can also assist in demonstrating competence during the formal appointment process.

Tue 6 May 2025

9:00 AM - 4:30 PM (7 hours 30 minutes)

This one-day course will help you meet your regulatory requirements if your risk assessment indicates that first aid training covering emergency protocols only is sufficient for your workplace.

6 - 7 May 2025

2 days, 9:00 AM - 5:00 PM

This course has been introduced to raise awareness of environmental issues, with a primary focus within the Defence sector and the acquisition process. The course aims to assist delegates with the skills, knowledge and development potential to understand and manage environmental problems at the practical level. Delegates are also introduced to aspects of environmental legislation and the mandatory requirements for formal compliance in Defence

Tue 6 May 2025

1 day, 9:00 AM - 5:00 PM (8 hours)

If the worst ever happened at sea and you had to abandon your vessel, would you know what to do? The RYA Sea Survival training course assumes the worst case scenario: that you have to abandon your ship.

Wed 7 May 2025

9:00 AM - 4:30 PM (7 hours 30 minutes)

This one-day course will help you meet your regulatory requirements if your risk assessment indicates that first aid training covering emergency protocols only is sufficient for your workplace.

Wed 7 May 2025

1 day, 9:15 AM - 5:30 PM (8 hours 15 minutes)

RYA First Aid gives you some knowledge so that in a medical emergency, you may be able to save lives, especially when you are in a remote location or at sea. This course is unique, as it is aimed at water sports enthusiasts and small craft operators, it takes a realistic look at the levels of First Aid that can be performed in a yacht, powerboat, dinghy or ocean rowing boat.

Wed 7 May 2025

9:30 AM - 1:00 PM (3 hours 30 minutes)

The course is suitable for any employee appointed as a Fire Marshal or Fire Warden. The course is also suitable for those employees looking to enhance their overall fire safety knowledge.

Wed 7 May 2025

1:30 PM - 5:00 PM (3 hours 30 minutes)

The course is suitable for any employee appointed as a Fire Marshal or Fire Warden. The course is also suitable for those employees looking to enhance their overall fire safety knowledge.

Thu 8 May 2025

1 day, 7:45 AM - 4:30 PM (8 hours 45 minutes)

The course is one day for civilians who work or provide a service to submarines. The course is called SMERAS - SUBMARINE, ESCAPE, RESCUE, ABANDONMENT & SURVIVAL and is held in the SMERAS Training Facility in Faslane, Scotland.

8 - 9 May 2025

2 days, 9:00 AM - 4:30 PM

The 2 day First Aid requalification course is a condensed version of the 3 day First Aid at Work course whereby we cover all topics in 2 days rather than 3. Only students who hold a current 3 day First Aid at Work certificate or a certificate that hasn’t expired by more than 28 days can attend.

Thu 8 May 2025

1 day, 9:00 AM - 5:00 PM (8 hours)

IOSH Working Safely® is an entry-level course which provides key health and safety training to employees across your organisation, enabling them to work safely and effectively. Developed by the Institution of Occupational Safety and Health (IOSH), the course teaches to the high standard of Health and Safety promoted by this globally chartered body, providing employees with practical, jargon-free knowledge and skills that they can apply effectively to the workplace.

Thu 8 May 2025

9:30 AM - 1:00 PM (3 hours 30 minutes)

This course aims to introduce autism through discussing the main areas of difference and providing an increased awareness of how autistic people may experience the workplace.

12 - 15 May 2025

4 days, 9:00 AM - 5:00 PM

The aim of this course is to provide delegates with the underpinning knowledge of Lifting Operations in order for them to understand the role and responsibility of the Appointed Person in lifting operations (APLO). On successful completion of the course candidates will be able prepare and implement safe systems of work for lifting operations including writing risk assessments and method statements.

12 - 15 May 2025

4 days, 9:00 AM - 5:00 PM

The City & Guilds accredited Authorised Person Electrical Low Voltage course will enable you to gain the knowledge required to carry out Authorised Person duties and responsibilities in order to achieve compliance with the requirements of the Electricity at Work Regulations 1989, using JSP375 as the reference for safe procedures.

Mon 12 May 2025

9:00 AM - 4:30 PM (7 hours 30 minutes)

This one-day course will help you meet your regulatory requirements if your risk assessment indicates that first aid training covering emergency protocols only is sufficient for your workplace.

12 - 14 May 2025

3 days, 9:00 AM - 4:30 PM

The 3 day First Aid at Work course is our most advanced First Aid course. It provides you with a comprehensive set of skills needed by any first aider at work. 3 days of practical, fun and interactive First Aid training. Gain the skills and qualification needed to be a First Aider on site. After successfully completing the course, you are provided with a certificate which is valid for 3 years. This complies with the Health and safety at work act 1974.

12 - 13 May 2025

2 days, 9:00 AM - 4:30 PM

The 2 day First Aid requalification course is a condensed version of the 3 day First Aid at Work course whereby we cover all topics in 2 days rather than 3. Only students who hold a current 3 day First Aid at Work certificate or a certificate that hasn’t expired by more than 28 days can attend.

12 - 14 May 2025

3 days, 9:00 AM - 5:00 PM

Elevate your software testing career with our ISTQB Foundation in Software Testing (CTFL) v4.0 course. This comprehensive program provides a solid foundation in software testing principles, preparing you for the globally recognized ISTQB CTFL certification. Ideal for professionals in the UK and worldwide, this course aligns with various software development methodologies, including Waterfall, Agile, DevOps, and Continuous Delivery.

12 - 14 May 2025

3 days, 9:00 AM - 5:00 PM

Our ITIL® 4 Foundation training course will enable you to understand a new way to look at IT Service Management (ITSM) through a Service Value System (SVS). Our ITIL® 4 Foundation training course will educate you on how to manage IT services and achieve business value within an enterprise. It is a widely accepted approach in IT Service Management (ITSM) and will introduce you to the core principles of ITIL® best practices and concepts.

12 - 13 May 2025

2 days, 9:00 AM - 5:00 PM

Delegates will get a thorough insight into all aspects of life as a marine mammal observer. Ideal for those aspiring to a career in marine mammal observation, this course is also useful for anyone in industry working alongside an MMO who wants to get a better understanding of the role. The course starts in the classroom with a look at what exactly an MMO does, exploring: how noise impacts marine mammals; the legislative landscape; record-keeping; reporting requirements; and mitigation measures.

13 - 14 May 2025

2 days, 9:00 AM - 5:00 PM

CONDO training requires that personnel are adequately prepared for operational deployments, and that this training is dependent on a number of factors including the nature and location of the operation, the duration of task and the threat.  

Tue 13 May 2025

9:00 AM - 12:00 PM (3 hours)

This three-hour practical refresher course provides first aiders with an opportunity to practise and update their skills as a qualified first aider, at any time while their first aid certificate is valid.

Tue 13 May 2025

9:30 AM - 1:00 PM (3 hours 30 minutes)

The course is suitable for any employee appointed as a Fire Marshal or Fire Warden. The course is also suitable for those employees looking to enhance their overall fire safety knowledge.

Tue 13 May 2025

1:00 PM - 4:00 PM (3 hours)

This three-hour practical refresher course provides first aiders with an opportunity to practise and update their skills as a qualified first aider, at any time while their first aid certificate is valid.

Tue 13 May 2025

1:30 PM - 5:00 PM (3 hours 30 minutes)

The course is suitable for any employee appointed as a Fire Marshal or Fire Warden. The course is also suitable for those employees looking to enhance their overall fire safety knowledge.

14 - 15 May 2025

2 days, 9:00 AM - 4:30 PM

The 2 day First Aid requalification course is a condensed version of the 3 day First Aid at Work course whereby we cover all topics in 2 days rather than 3. Only students who hold a current 3 day First Aid at Work certificate or a certificate that hasn’t expired by more than 28 days can attend.

Thu 15 May 2025

9:30 AM - 1:00 PM (3 hours 30 minutes)

Media Training

Thu 15 May 2025

1:30 PM - 5:00 PM (3 hours 30 minutes)

Media Training

Fri 16 May 2025

9:00 AM - 4:30 PM (7 hours 30 minutes)

This one-day course will help you meet your regulatory requirements if your risk assessment indicates that first aid training covering emergency protocols only is sufficient for your workplace.

17 - 21 May 2025

1 week, 9:15 AM - 5:45 PM

The RYA Day Skipper Shorebased theory course will help you become involved with onboard navigation and passage planning or become a skipper. This course is aimed at; Those new to boating (yachting, keel-boating, motor boating, power-boating or coastal rowing) and Those who already have considerable crewing experience and now want to progress

19 - 22 May 2025

4 days, 9:00 AM - 5:00 PM

The City & Guilds accredited Authorised Person Electrical Low Voltage course will enable you to gain the knowledge required to carry out Authorised Person duties and responsibilities in order to achieve compliance with the requirements of the Electricity at Work Regulations 1989, using JSP375 as the reference for safe procedures.

19 - 23 May 2025

1 week, 9:00 AM - 5:00 PM

IPC-J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies. The sole industry consensus standard training covering electronic assemblies, Soldering, J-STD-001 is recognized globally for its criteria on soldering processes and materials. Updated with participants from 18 countries providing input and expertise, this theory and practical training brings the latest criteria along with new information to ease its use and comprehension.

19 - 23 May 2025

1 week, 9:00 AM - 5:00 PM

The NIST Cybersecurity Framework 800-53 Practitioner course, is an overlay course, based on the NIST Cyber Security Framework, a publication of the National Institute of Standards and Technology.

19 - 20 May 2025

2 days, 9:00 AM - 5:00 PM

The NIST Cybersecurity Framework Foundation course, is an overlay course, based on the NIST Cyber Security Framework (NIST-CSF), a publication of the National Institute of Standards and Technology.

19 - 21 May 2025

3 Days

This course guides learners through the fundamental requirements and knowledge necessary for customer project team key users, IT Professionals, Solution Architects, and Project Managers who are beginning their journey into RISE with SAP S/4HANA Cloud, private edition implementations.

Tue 20 May 2025

1 day, 9:00 AM - 5:00 PM (8 hours)

This course covers the requirements of the Provision and Use of Work Equipment Regulations (PUWER) and provides delegates with a thorough knowledge of this legislation and the duties of an employer to provide safe equipment for their employees to use. The course explains the implications of modifying machines and the steps that need to be taken to evaluate new machines.

20 - 21 May 2025

2 days, 9:00 AM - 5:00 PM

Sustainable Development in Defence Acquisition is a two-day introduction to sustainable development, and the MOD’s approach to integrating sustainable development in acquisition. The course covers a brief history of sustainable development, case studies of good sustainable practice, and practical tools to aid implementation of sustainable procurement and sustainable business within the MOD.

Tue 20 May 2025

9:15 AM - 4:45 PM (7 hours 30 minutes)

The RYA SRC (VHF Radio) course is the shortest of the four GMDSS Certificates and is aimed at skippers and crew of small craft operating in inshore and coastal regions. It is the most common radio certificate for leisure boaters.

21 - 23 May 2025

3 days, 9:00 AM - 4:30 PM

The 3 day First Aid at Work course is our most advanced First Aid course. It provides you with a comprehensive set of skills needed by any first aider at work. 3 days of practical, fun and interactive First Aid training. Gain the skills and qualification needed to be a First Aider on site. After successfully completing the course, you are provided with a certificate which is valid for 3 years. This complies with the Health and safety at work act 1974.

22 - 23 May 2025

2 days, 9:00 AM - 4:30 PM

The 2 day First Aid requalification course is a condensed version of the 3 day First Aid at Work course whereby we cover all topics in 2 days rather than 3. Only students who hold a current 3 day First Aid at Work certificate or a certificate that hasn’t expired by more than 28 days can attend.

22 - 25 May 2025

4 days, 9:15 AM - 6:00 PM

The RYA Day Skipper Motor (Power) Course includes boat handling safety and navigation skills and is aimed at new motor cruiser skippers. It enables new motorboats to skipper a motor cruiser in familiar waters by day. Any UK citizen or bona fide resident who achieves the Day Skipper Power is automatically eligible for the ICC (International Licence) for powered craft (unrestricted by length).

Fri 23 May 2025

9:00 AM - 4:00 PM (7 hours)

The Managing Safely Refresher course is designed to provide continued support to managers in dealing with health and safety issues in the workplace. Specifically the course aims to: Revise key management responsibilities from the original Managing Safely course Update relevant changes in good practice, guidance, legislation and standards

26 - 29 May 2025

4 days, 9:00 AM - 5:00 PM

This course is for Experienced C++ programmers, who are looking to gain advanced skills and programming techniques using C++

27 - 28 May 2025

2 days, 9:00 AM - 4:30 PM

The 2 day First Aid requalification course is a condensed version of the 3 day First Aid at Work course whereby we cover all topics in 2 days rather than 3. Only students who hold a current 3 day First Aid at Work certificate or a certificate that hasn’t expired by more than 28 days can attend.

27 - 28 May 2025

2 days, 9:00 AM - 4:30 PM

Learn about ‘A model-based approach to Systems Engineering, an approach to systems engineering which uses models to deal with complexity and improve communication with stakeholders. Discover how adopting a model-based approach can improve your systems engineering. A complete overview of MBSE and how it can be used in your business.

Wed 28 May 2025

1 day, 7:45 AM - 4:30 PM (8 hours 45 minutes)

The course is one day for civilians who work or provide a service to submarines. The course is called SMERAS - SUBMARINE, ESCAPE, RESCUE, ABANDONMENT & SURVIVAL and is held in the SMERAS Training Facility in Faslane, Scotland.

28 - 30 May 2025

3 days, 9:00 AM - 4:30 PM

The 3 day First Aid at Work course is our most advanced First Aid course. It provides you with a comprehensive set of skills needed by any first aider at work. 3 days of practical, fun and interactive First Aid training. Gain the skills and qualification needed to be a First Aider on site. After successfully completing the course, you are provided with a certificate which is valid for 3 years. This complies with the Health and safety at work act 1974.

28 - 29 May 2025

2 days, 9:00 AM - 4:30 PM

The 2 day First Aid requalification course is a condensed version of the 3 day First Aid at Work course whereby we cover all topics in 2 days rather than 3. Only students who hold a current 3 day First Aid at Work certificate or a certificate that hasn’t expired by more than 28 days can attend.

28 - 30 May 2025

3 days, 9:00 AM - 5:00 PM

Our ITIL® 4 Foundation training course will enable you to understand a new way to look at IT Service Management (ITSM) through a Service Value System (SVS). Our ITIL® 4 Foundation training course will educate you on how to manage IT services and achieve business value within an enterprise. It is a widely accepted approach in IT Service Management (ITSM) and will introduce you to the core principles of ITIL® best practices and concepts.

29 - 30 May 2025

2 days, 9:00 AM - 5:00 PM

Accredited by the Association for Project Management (APM), this course will lead to an internationally recognised qualification. The APM Project Fundamentals Qualification provides the foundation for further training and qualifications in the expanding project management field. This course is aligned to the APM Body of Knowledge 7th Edition

2 - 6 Jun 2025

1 week, 9:00 AM - 5:00 PM

In the LabVIEW Core 1 Course, you will explore the LabVIEW environment and interactive analysis, dataflow programming, and common development techniques in a hands-on format.

2 - 4 Jun 2025

3 days, 9:00 AM - 4:30 PM

The 3 day First Aid at Work course is our most advanced First Aid course. It provides you with a comprehensive set of skills needed by any first aider at work. 3 days of practical, fun and interactive First Aid training. Gain the skills and qualification needed to be a First Aider on site. After successfully completing the course, you are provided with a certificate which is valid for 3 years. This complies with the Health and safety at work act 1974.

2 - 4 Jun 2025

3 days, 9:00 AM - 5:00 PM

Elevate your software testing career with our ISTQB Foundation in Software Testing (CTFL) v4.0 course. This comprehensive program provides a solid foundation in software testing principles, preparing you for the globally recognized ISTQB CTFL certification. Ideal for professionals in the UK and worldwide, this course aligns with various software development methodologies, including Waterfall, Agile, DevOps, and Continuous Delivery.

Mon 2 Jun 2025

1 day, 9:00 AM - 5:00 PM (8 hours)

Solid Edge Simulation is a built-in finite element analysis (FEA), pre- and post-processing, tool for design engineers. This course will teach you how to digitally validate part and assembly designs within Solid Edge, analyse different mechanical load cases and boundary conditions and accurately interpret the results.

3 - 4 Jun 2025

2 days, 9:00 AM - 5:00 PM

CONDO training requires that personnel are adequately prepared for operational deployments, and that this training is dependent on a number of factors including the nature and location of the operation, the duration of task and the threat.  

Tue 3 Jun 2025

9:15 AM - 4:45 PM (7 hours 30 minutes)

The RYA SRC (VHF Radio) course is the shortest of the four GMDSS Certificates and is aimed at skippers and crew of small craft operating in inshore and coastal regions. It is the most common radio certificate for leisure boaters.

Fri 6 Jun 2025

9:00 AM - 4:00 PM (7 hours)

The Managing Safely Refresher course is designed to provide continued support to managers in dealing with health and safety issues in the workplace. Specifically the course aims to: Revise key management responsibilities from the original Managing Safely course Update relevant changes in good practice, guidance, legislation and standards

9 - 13 Jun 2025

1 week, 9:00 AM - 5:00 PM

Project Planning & Control supports the publication of the APM's guide, ‘Planning, Scheduling, Monitoring and Control – The Practical Project Management of Time, Cost and Risk.’ It provides guidance and best practice for project planning and control and is applicable across all industries and sectors.

9 - 12 Jun 2025

4 days, 9:00 AM - 5:00 PM

To provide Delegates with sufficient skills and knowledge to carry out their duties safely and efficiently whilst operating forklift trucks in the workplace.

9 - 10 Jun 2025

2 days, 9:00 AM - 5:00 PM

The NIST Cybersecurity Framework Foundation course, is an overlay course, based on the NIST Cyber Security Framework (NIST-CSF), a publication of the National Institute of Standards and Technology.

9 - 13 Jun 2025

1 week, 9:00 AM - 5:00 PM

Project Oriented Environmental Management Systems (POEMS) has been developed and mandated for all defence acquisition projects in order to enable environmental impacts to be minimised through life of equipment and services.

Tue 10 Jun 2025

9:00 AM - 4:30 PM (7 hours 30 minutes)

The 1 day CONDO refresher training is required annually under DEFSTAN 05-129 (Defence Standards (Procedures & Requirements)) amended 12th March 2010.

12 - 13 Jun 2025

2 days, 9:00 AM - 5:00 PM

Project Planning & Control supports the publication of the APM's guide, ‘Planning, Scheduling, Monitoring and Control – The Practical Project Management of Time, Cost and Risk.’ It provides guidance and best practice for project planning and control and is applicable across all industries and sectors.

Thu 12 Jun 2025

9:30 AM - 1:00 PM (3 hours 30 minutes)

The course is suitable for any employee appointed as a Fire Marshal or Fire Warden. The course is also suitable for those employees looking to enhance their overall fire safety knowledge.

Thu 12 Jun 2025

1:30 PM - 5:00 PM (3 hours 30 minutes)

The course is suitable for any employee appointed as a Fire Marshal or Fire Warden. The course is also suitable for those employees looking to enhance their overall fire safety knowledge.

16 - 19 Jun 2025

4 days, 9:00 AM - 5:00 PM

This course is for Experienced Software Developers who are completely new to C++ programming or those with elementary skills in C++, who need to gain hands-on experience of developing commercial applications.

16 - 18 Jun 2025

3 days, 9:00 AM - 4:30 PM

The 3 day First Aid at Work course is our most advanced First Aid course. It provides you with a comprehensive set of skills needed by any first aider at work. 3 days of practical, fun and interactive First Aid training. Gain the skills and qualification needed to be a First Aider on site. After successfully completing the course, you are provided with a certificate which is valid for 3 years. This complies with the Health and safety at work act 1974.